Build Instructions for: Bitty Looper
by: irrelevant.irreverent
File Format: RCT 2 (no expansions)
Ride Type: Wooden Roller Coaster (RCT2)
Vehicle Type: (3 7-car trains)
Operating Mode: Continuous Circuit Block Sectioned Mode
Track Segments (Total): 44
Segment Number Type
11End station (1)
21Level to up [chain lift] (1 to 2)
31Right curve up [R2] (2 to 4)
41Up [chain lift] (4 to 5)
51Up [chain lift] (5 to 6)
61Up [chain lift] (6 to 7)
71Up to level [chain lift] (7)
81Level (7)
91Level to down (7 to 6)
101Down to down steep (6 to 4)
111Steep downward twist right [R1] (4 to 0)
121Down steep to down (0 to -2)
131Down to level (-2)
141Level to up (-2 to -1)
151Vertical loop right (-1 to -2)
161Down to level, roll right (-2)
171Helix up right [R3] (-2 to -1)
181Helix up right [R2] (-1 to 0)
191Helix up right [R2] (0 to 1)
201Roll right to level (1)
211Level to left bank slope down (1 to 0)
221Banked left curve down [R2] (0 to -2)
231Banked left curve down [R2] (-2 to -4)
241Left bank slope down to left bank (-4)
251Banked left curve [R2] (-4)
261Banked left curve [R3] (-4)
271Roll left to level (-4)
281Level to roll right (-4)
29-302Banked right curve [R3] (-4)
311Roll right to level (-4)
321Brakes [18 mph = 30 km/hr] (-4)
331Block brake (-4)
34-352Right curve [R4] (-4)
361Level (-4)
371Level to up [chain lift] (-4 to -3)
381Up [chain lift] (-3 to -2)
391Up [chain lift] (-2 to -1)
401Right curve up [R2] (-1 to 1)
411Up to level [chain lift] (1)
421Begin station (1)
43-442Middle station (1)
This file was created in the RCTspace.com Ride Exchange for RCT1 and RCT2 Rides © rcthelp 2003 to the present.
Not to be reproduced without expressed permission.
With thanks to Greg Wolking for permission to use his RCT Track Decoder program.